Version 11.0 Stellwerk 2001

The English STW2001 version (11.0.0014 of 10-10-2009) can be loaded down by users of version 11.0 and used (customers of older versions 10.0 only with upgrade costs *). You need an additional release-code (R-Code) and your license number and CD-key for executing the version 11.0 ). The release code can be ordered by users of 10.x via email/phone.

*) upgrade costs see price list

(please transfer money order with your  license number directly to my account)

 The full version 11.0 can only be executed if you have your license data!  

Important notices to all customers

I cannot reach any longer several customers by emails, because e.g. they have changed their email address or they did not tell me the email address. If you have not received in 2009 my Christmas greeting or no invitation to the "20 years Stellwerk jubilee", this may be the reason. For this case please, send me a short email, and I can send you real important information for the next future also.

Newest English full version STELLWERK 2001 Version  11.0.0014

Reduced English Update Stellwerk 2001 Version 11.0.0014

For 11.0 customers, who have installed before the full version 11.0 from CDROM or above download is done before, download here (about 4.5 MB)!

Download of reduced English program update   

If registered users  want to get also a CDROM, so they can order by receipt, see price list.

The update contains improvements, error corrections and expansions of:

    Support of Massoth DiMAX,

    full use of expanded mode (P50X) for:

                     Uhlenbrock Intellibox, Fleischmann Twin-Center, Tams EasyControl,

    including of locomotive pictures during processing,

    extended contact control and other more.

The full English update (STW2001_V11e.exe) includes as self unpacking file (approx. 27 MB) the following files (own files are not deleted!):

                   Stw2001.exe        = Stellwerk (Switch Tower) Program (English version 11.0.0014)

                         Stw2001e.chm     = HTML-Help file English

                         Stw2001d.chm     = HTML-Help file German

                         Stw2001e.pdf       = Manual English (October 2007 as Acrobat Reader file)

                   StwEdit..exe          = Schedule Editor ( English version 11.0.0004)

                         StwEdite.chm       = HTML-Help file English

                         StwEditd.chm       = HTML-Help file German

                         ReadMe.txt           = Notes

                         System files         = OCX/DLL files

                        and:

                        old hlp help-files  and Expanded example files (stw, wav, sfp, dec, txt)

The reduced English update (STW_UPD11e_small.exe) contains as self unpacking file (approx. 4,5 MB)  only the files STW2001.exe, STWEdit.exe, STW2001e.pdf, HTML-help-files and ReadMe.txt   with epansions and error corrections.

DEMO Stellwerk 2001

The English DEMO version of STELLWERK 2001 approx. 29,0 MB packed data to transfer. You can order also as full CDROM; the price (15.00 € without postage/shipping)  can be taken into account if a full version will be ordered without new CDROM later (shipping costs see price list!).

This DEMO-version can construct track layouts as well as all other activities executing but  without real switching and driving possibilities on the track. A HTML-help file and examples are generated by the SETUP also.  Stored files can be used by STELLWERK 2001 further later with the full version.

         Down loading of:     DEMO-Version Stellwerk 2001     (Date: 30-12-2007 Version 11.0.0004)

Actual Updates 11.0.0001 up to 11.0.0014

new 11.0.0014

-------------
45. Lenz LI100 was not right checked.
44. Names within Loco list, which contain a " are changed to a ' .
43. Double names within schedules will be found when read in.
42. Schedule command Q corrected.

 11.0.0013

-------------
41. Timing changed to get the first needed answer of the DiMAX.
40. Changing of Massoth output track commands for 28  driving steps.
39. First positioning of function windows for triggering changed (more to middle).
38. Error "Index 9" during processing (funkions) was corrected..

11.0.0012
---------
37. Routines for decoder programming using Lenz LI100F or Lenz LI101F are changed.

11.0.0011
---------
36. data saved with update 10 couln't read in again.

11.0.0010
---------
35. Contact converting of DiMAX part was false for numbers from 65a up to 1289b => 129 up to 256.

11.0.0009
---------
34. Function triggering corrected for contact control.

11.0.0008
---------
33. Loco light switching was corrected for locos with speed zero at programm starting time.
32. Changing of loco definitions for braking procedures:
The internal driving step 1 (stop without braking delay) can be automatic skipped -if wanted- at slow braking.

11.0.0007
---------
31. It was not possible to change to Baud rate=19.200 for the special Lenz Interface LI100F.
30. Correction of function triggering for Intellibox with P50X mode and functions F4 up to F8.
29. Double traction function changed for DiMAX.

11.0.0006
---------
28. Changes for schedule control (Q- + N-command) and  displaying schedule names.

11.0.0005
---------
27. Main window changed for low graphic solution.
26. Correction for Massoth DiMax function triggering.

11.0.0004
---------
25. Error corrections.
24. Integration of Massoth feedback module 8170001 into documentation (converting contact numbers).
23. New maximum limit of (virtual) contact number to 1056 (because LGB MTS).
22. Update of documentation (pdf-file).
21. automatic loading of schedules, if stw-file is stored with this version.
20. Schedule names are now saved together with stw-file.
19 Integration of the Windows HTML Help System for help-files.
18. Command button "Deleting all activities" can be seen now  (again) in contact definition window.
17. New windows as part for starting schedules.
16. Diplay of loco speed/direction beyond the loco icons.

11.0.0003
---------
15. Correktion in contact definition window (switch routes).

11.0.0002
---------
14. Correction of contact triggering for Märklin schedule control.

11.0.0000
---------
13. Some new function pictures.
12. correction of function triggering using contact control and "?".
11. New processing icon for stop (on/off) the defined automatic contact control.
10. Fully new written English documentation of STW2001 (PDF-file, it can be found with name STW2001e.pdf"
and STWEdit documentation is part of it.
09. Tool to convert contact numbers for LGB->DiMAX.
08. Changes at "Falls" (If)-schedule command.
07. Virtual magnetic article area.
06. Extended contact control (activities if contact is changing to free).
05. Locomotive pictures are used during control.
04. Support of Tams EasyControl with extended mode (P50X), e.g. driving steps >14, locos >80.
03. Support of Fleischmann TWIN-CENTER with extended mode (P50X), e.g. driving steps >14, locos >80.
02. Support of Uhlenbrock Intellibox with extended mode(P50X), e.g. driving steps >14, locos >80.
 

Older information:

Last Version 10.5.0008
1. Reducing of size of input commands in buffer if using magnetics 'setting to initial status'
2. Sometime false values using loco drivings steps (28) for Lenz version 2.x.
3. Error if used a distant signal coupled with a home signal.
4. COM-Interface numbers changed up to 99 generally, to use USB/Com cable and/or Lenz

    USB Interface for all compplex USB configurations.
5. An all-purpose counter can be reset to starting value by switching to "orange"

    (e.g. by middle mouse button); no automatic contact triggering of the three possibilities will be executed.
 

Versions 10.5.0004 -10.5.0006

01. Update-Msg in Trace included.
02. Internal security call for outstanding inputs during start.
03. Changes for LI101F problem in connection with buffer overflow.
04. Correction für updating Lenz track occupation sensors and "last status".
05. Switching coupled magnetic article within contact control.
06. Now no termination, if no printer is defined in Windows System.
07. Check for undefined addresses reading schedule files.
08. Schedule message (/, M) can be moved now.
09. Remarks can be written after command in schedules on same line.
      Condition is: * (star) after one or more blanks.
      Example F, K, 129a, B * Train at station?
10. A new field in schedule-Editor for remark after command.
11. First or second parameter of I-command may have value 0 (zero).
12. Now CV>128 up to CV255 can be read in and/or programmed for loco-decoder
     (at single CV and Lenz-System), e.g. for special ESU-Decoder.

Versions 10.5.0002-10.5.0003

01. Changing driving control for Lenz 28/126 driving steps
02. Up to 99 of COM number for LI-USB interface.

Version 10.5.0001

1. Support of Lenz USB-Interface "LI-USB".
2. Intergration of "Marker", usage by contact- and schedule-control.
3. New magnetic articles: direction arrows, all-purpose-counter.
4. New option for switch route elements at release time (reset to initial status yes/no).
5. New schedule commands for: marker and all-purpose-counter.
6. Adaption STWEdit to new , changed schedule commands.
7. English documentation (PDF-file) of STW2001 is now delivered with name

   "STW2001e.pdf" and STWEdit documentation is enclosed.

older versions 10.00.1024 up to 10.00.1035

1. There was false baud data stored, now value is written into stw file after
DigSys entry as 2400, 4800, 9600, 19200, 38400, 57600 or 11520 (baud).
2. the three symbols for standard speed are changig now its color (to green)
if speed has changed to these special values. Changes to these speed values
get now slowly.
3. Speed input is set to "active", when clicking on standard speed points, light
or stop icons.
4. Only first start was possible after changing a magnetic article, now "continue"
is possible also.
5. Correction for Lenz (Loco command 230 was unknown).
6. Function "1Loesch" in schedule control was changed.
7. Changes for Lenz magnetics feedback in connection with block/free of contacts.
8. Switch route triggering by contacts with same start- and end-point was changed
(automatic searching).
9. Interface-blocking for Lenz-Interface LI101F are suppervised now.
Attention: Lenz has now a hardware-update for LI101F!
10. Funktions can be triggered now also by function pictures (P2 up to P37).
11. Time command was changed if values lower than 1 sec.
12. Adaptation for Windows XP/SP2.

13. Changes of schedule control (C-Commans, F-Command,K-command
and N-command).
14. Error solved within Timer Control Fehler.
15. Emergency-Stop routine coorected for Lenz.
16. Loading error of STWEdit corrected.
17. Limit control of locomotion definition improved.
18. Virtual contact numbers >469 now also posssible for Märklin,
Fleischmann and Uhlenbrock.
19. Function window was changed and now it can seen continually.
20. Correction of manual page 13.